Advance Termite Bait Stations (Single Stations)

Quick Summary of Installation

• Install the stations at the 10 to 20 ft intervals (recommended 10 ft.) 3 or so feet from the foundation wall. Maximum space apart is not to exceed 20 feet.
• Monitor termite activity at proper intervals (usually every 90- 120 days).
• Replace inspection cartridge with bait cartridge when termites are present in stations.
• Replace items as needed.

In the soil

The Advance Termite Bait station has ultra-low disturbance design, which means less termite abandonment.

Easy Installation:

1. We would suggest either to rent a four inch auger(the easiest way), or install the stations with a post hole digger or shovel. These termite bait stations are designed for easy termite access. A preferred wood species with horizontal grooves in the base of the station allow easy termite access into the termite stations. The stations also contain Puri-CellT Compressed Cellulose Tablets , a unique wood feeding source for termites

2. Monitor the stations on a quarterly basis, look for termite activity inside the termite bait station. Once you do have termite activity, you replace the Termite Inspection Cartridge with the Termite Bait Cartridge. Quick transfer from wooden termite monitoring base allows for less disturbance of termites actively feeding on the wooden base,
   letting the termites recruit other termites for feeding on the stations.

3. The Termite Bait Cartridge has a large bait load.
   Once termites begin feeding, there is enough bait to kill two to eight times the average colony size and is nearly three times the bait load of the leading competitive product

4. Recheck bait stations at this point in 90 days, to see if termite activity has ceased. If ceased, change the Termite Bait Cartridge with the Termite Inspection Cartridge and continue quarterly monitoring, rechecking bait stations.