Gentrol Point Source
Starting at $36.50
BUNDLE & SAVE 5%!
Product Information
Gentrol Point Source Features
- Active Ingredient:
Hydroprene 90.60% - A cockroach/stored product pest(red, confused flour, and merchant beetles) device that prevents roach reproduction by releasing the Gentrol insect growth regulator (IGR) into a treatment area.
- Reduces Roach and Stored Product Pest Populations in a way conventional Insecticides can not.
- Labeled For Use In Food Handling Establishments
- Because immature roaches are prevented from developing into reproductive adults, this product effectively breaks the roach life cycle. By inhibiting reproduction, Gentrol Point Source, by itself, will control cockroach populations over time.
- Once Gentrol Point source is released, the active ingredient moves from the Gentrol Point Source device into a localized area. Roaches and stored product pest do not have to come in contact with the Gentrol Point Source device to be affected.
- No need to vacate areas during treatment. Low toxicity.
- Plastic disks that when squeezing the device's raised end-penetrates 75 sq. ft., breaking the growth cycle lasts 3 months. That way, pre-adult stored product pests never need to contact the device. See Figure A.
Activate the Gentrol Point Sources
Activating Gentrol Point Source is as simple as squeezing the raised end of the plastic, adhesive-back device. This releases Gentrol IGR onto a filter paper. Once in place, Gentrol will move into a 75-foot area and last 90 days.
Since the molecules are heavier than air, currents carry them into a roach or stored product pests' hiding places.Where to Place Gentrol Point Sources
Place these small stations in areas where roaches/stored product pests have infested. Pay particular attention to locations of roach activity. More devices may be needed in areas with a heavy roach infestation. Gentrol Point Source may be used in areas where food is handled or prepared. Do not place the devices in direct contact with food preparation surfaces or within two feet of exposed food.
One to two weeks after application, you will begin to see roaches with crinkled wings, showing the initial effects of Gentrol. Gentrol point sources prevent stored product pests from becoming adults, thus breaking the life cycle.
Packaging
- Single Disk -Each disk covers 75 square feet (Minimum purchase of 4 disks)
- Box of 20 disks
Packaging | single disk or box of 20 disks |
---|---|
Product Label | Gentrol Point Source Label |
SDS | Gentrol Point Source SDS |
More PDF's | N/A |
Target Pest | |
Active Ingredient (s) | Hydroprene 90.60% |
For Use : | Gentrol Point Source can be used in buildings and modes of transportation. Permitted sites of application include restaurants, homes, hotels, kitchens, laboratories, apartment buildings, day care centers, machinery, equipment, greenhouses, hospitals, mausoleums, nursing homes, office buildings, schools and warehouses. Gentrol Point Source is also intended to be used in various modes of transportation including but not limited to aircraft, buses, trucks, trailers, rail cars and marine vessels. |
Yield | 1 disk-75 sq feet |
Mixture|Application | Activating Gentrol Point Source is as simple as squeezing the raised end of the plastic, adhesive-back device. This releases Gentrol IGR onto a filter paper. |
Retreatment | 90 days |
Shipping Restrictions | N/A |
More Instructions | For faster results, Gentrol Point Source may be used in conjunction with EPA approved products that kill roaches and stored product pests(red, confused flour, and merchant beetles). Roach populations are difficult to control because roaches reproduce so rapidly. However, when a conventional insecticide designed to kill roaches does not provide 100% elimination, Gentrol Point Source will prevent survivors from re-establishing the population.
DIRECTIONS FOR USE:Figure A Roaches or Stored Product Pest do not have to come into contact with the GENTROL POINT SOURCE to be affected (See Figure A). Do not activate the GENTROL POINT SOURCE device until ready to use. To activate the GENTROL POINT SOURCE, press firmly between thumb and forefinger on the pouch located on the side of the device, until a snapping sound is heard, indicating that the GENTROL-containing capsule has been opened (See Figure B). Following activation, the GENTROL POINT SOURCE is now ready to apply. The GENTROL POINT SOURCE device may be placed in any position Press firmly between thumb and forefinger on the pouch located on the side of the device, until a snapping sound is heard, indicating the GENTROL-containing capsule has been opened. Place the GENTROL POINT SOURCE device in areas where roach or SPP activity has been observed. These areas include: in and around cabinets, closets, pantries, drawers, refuse areas, electrical boxes, equipment, and false ceilings. Also, place around doors, expansion joints, pipe chases, dressers, windows, heating and air conditioning ducts, refrigerators, and voids where pests are active. One GENTROL POINT SOURCE device may be placed to treat up to a 75 square foot area, paying particular attention to locations of roach or SPP activity. More devices may be needed in areas with a heavy roach or SPP infestation. IMPORTANT! In order for the GENTROL POINT SOURCE to adhere properly, wipe surface clean prior to application. Use as many tape strips as needed. For vertical placement, expose sticky surface by removing paper backing and pressing the device firmly in place. Replace all devices every 3 months for continued effectiveness (See Figure C). Place the GENTROL POINT SOURCE device in areas where roach or SPP activity has been observed. These areas include: in and around cabinets, closets, pantries, drawers, refuse areas, electrical boxes, equipment, and false ceilings. Also,place around doors, expansion joints, pipe chases, dressers, windows, heating and air conditioning ducts, refrigerators, and voids where pests are active. Â One GENTROL POINT SOURCE device may be placed to treat up to a 75 square foot area, paying particular attention to locations of roach or SPP activity. More devices may be needed in areas with a heavy roach or SPP (Stored Product Pest )infestation. IMPORTANT! In order for the GENTROL POINT SOURCE to adhere properly, wipe surface clean prior to application. Use as many tape strips as needed. For vertical placement, expose sticky surface byremoving paper backing and pressing the device firmly in place. Replace all devices every 3 months for continued effectiveness (See Figure C). FOOD HANDLING ESTABLISHMENTSGENTROL POINT SOURCE may be used in areas where food is handled or prepared. Placements include areas for receiving, storage, packing, edible waste storage, machinery, and enclosed processing systems (mills, dairies, edible oils, syrups). Serving areas would also be considered as a food area. The GENTROL POINT SOURCE may also be applied to non-food areas of food handling and preparation establishments. Areas of application include garbage areas, lavatories, offices, lockers, mechanical rooms, closets, and storage areas. Do not place the device within three feet of any food handling or food preparation area. The GENTROL POINT SOURCE can also be used where conventional sprays and foggers may not be appropriate or where baits may be less effective due to competing food sources. GENTROL POINT SOURCE may be used in areas where food is handled or prepared. Placements include areas for receiving, storage, packing, edible waste storage, machinery, and enclosed processing systems (mills, dairies, edible oils, syrups). Serving areas would also be considered as a food area. The GENTROL POINT SOURCE may also be applied to non-food areas of food handling and preparation establishments. Areas of application include garbage areas, lavatories, offices, lockers, mechanical rooms, closets, and storage areas. Do not place the device within three feet of any food handling or food preparation area. The GENTROL POINT SOURCE can also be used where conventional sprays and foggers may not be appropriate or where baits may be less effective due to competing food sources. |