Flying Ants vs Termites With Wings
Mabi Injectors
MABI injectors are patented one-way injection valves that let you drive termiticide into concrete and wall voids under pressure without back flow or splashback. Built for precision and reuse, they give homeowners and DIYers the same controlled application professionals rely on for thorough termite treatments.
Why MABI Injectors Make Termite Treatments Cleaner
Injecting termiticide into a drilled hole in a slab or wall sounds simple until the chemical backs out under pressure, splashing onto surfaces and leaving the void under-treated. That mess and waste is exactly what MABI injectors are engineered to prevent. These patented injectors seat inside the drilled hole and use a one-way valve that holds pressure as you inject, so the termiticide flows into the material instead of back at you. The result is cleaner work, better chemical distribution, and a treatment you can repeat later without drilling a new hole.
How MABI Injectors Improve Termite Treatments
When you are creating a continuous chemical barrier through concrete or into wall voids, even distribution under pressure is everything. A termite rod injector setup built around MABI injectors lets you push product deep into the substrate in just seconds, with the optimal spread that pressurized application provides. The one-way valve blocks the back flow and splashing that plague standard plugs, which both wastes expensive termiticide and leaves gaps in your barrier. Because the injectors stay in place, re-injection is possible without re-drilling, so follow-up treatments are faster and leave the structure intact.
Using MABI Injectors With Your Equipment
MABI injectors are designed to work as a system with your existing termite rods. An injection tip threads onto standard B&G termite rods so the rods can engage the injectors, and gray caps are available to conceal and protect each injector's one-way valve, fitting flush in both wood and concrete. To re-treat, you simply remove the cap and inject again. This modular setup makes the termite treatment injector approach practical for DIYers who want professional-grade placement: drill on the labeled spacing, seat the injectors, attach the tip to your rod, and apply at steady pressure to hit your target volumes beneath slabs and along footings.
Building a Complete Termite Barrier
Injectors solve the placement problem, but they are one piece of an overall termite strategy. Pair them with the right liquid termiticide for soil and sub-slab work, and add foams or dusts for wall voids and hard-to-reach cavities where rodding is not practical. Using MABI injectors for the concrete and slab penetrations, alongside the proper application equipment for trenching and foaming, gives you continuous coverage across the perimeter, expansion joints, and interior slabs.
Related Categories
- Termite Insecticides
- Professional Termite Dusts
- Termite Foams
- Termite Equipment
- Termite Control Products
Frequently Asked Questions
What makes MABI injectors different from standard termite plugs?
MABI injectors use a patented one-way valve that holds pressure during injection, preventing the back flow and splashback common with standard plugs. This gives you better chemical distribution under pressure and lets you re-inject later without drilling a new hole, which basic plugs cannot do.
Do I need a special tip to use MABI injectors?
Yes. An injection tip threads onto standard B&G termite rods and allows the rods to engage the injectors. Without the tip, the rod cannot connect to the injector, so the tip is required to put the system to work.
Can MABI injectors be used in both concrete and wood?
They are designed primarily for concrete and wall void termite treatments, and the matching gray caps fit in both wood and concrete to conceal and protect the valve. This makes them versatile across the different substrates you encounter on a structure.
Can I re-treat an area without drilling new holes?
Yes. Because the injectors remain seated in the original holes, you can remove the protective cap and inject again whenever a follow-up treatment is needed. This saves time and avoids adding more holes to the structure.
Are MABI injectors suitable for DIY termite treatments?
They are. Paired with standard termite rods and the correct injection tip, MABI injectors give homeowners the same controlled, pressurized placement professionals use. Call 1-800-476-3368 if you would like help assembling the right injection setup.
Get Precision Termite Treatment With MABI Injectors
Treat concrete and wall voids the way the pros do, with patented injectors built for clean, pressurized, repeatable application. Shop MABI injectors and the tips and caps that complete the system today, and call our knowledgeable staff at 1-800-476-3368 for help building your termite treatment kit.
Contact Us Today
