Pur-Fill 1G Beige Foam - 750 ml can

In stock

Starting at $27.45

Grouped product items
Product Name Price/Ea. Quantity
PUR-FILL 1G Foam - 750 ml can (Beige)
PUR-FILL 1G Foam - 750 ml can (Beige)
  • Buy 2 for $22.75 each and save 17%
  • Buy 4 for $19.40 each and save 29%
PUR-FILL 1G Foam (Beige) - Case of 12
PUR-FILL 1G Foam (Beige) - Case of 12
  • Buy 2 for $205.90 each and save 3%
Total: $0.00

Product Information

Pur-Fill 1G Foam (Beige)

Pur Fil 1 G seals and bonds to seal and to stop the passage of rodents, pests, bats, squirrles, radon, odor, air, gases, water, dust, fiber, and sound. It is a closed cell foam and beige in color. It is a polyurethane and moisture curing foam.

This foam must be used with a foam gun such at the Pur Shooter or Pageris Eco.

Each 750ml can dispenses 12 gallons of foam. One 750 ml can of Pur-Fill 1G foam creates cured foam measuring 2,820 cubic inches. Each can provides up to 1200 linear feet of a 1/2" bead.

Pur-Fill 1G Foam - Features

  • Professional Control
  • Within ten minutes the foam is tack-free; within thirty minutes it is trimmable
  • No cleaning needed
  • Perfect for windows and doors
Product Label N/A
Target Pest N/A
Active Ingredient (s) N/A
For Use : N/A
Yield Each can provides up to 1200 linear feet of a 1/2" bead.
Mixture|Application N/A

How to Use Pur-Fill 1G Foam :

Surface Preparation:

  • Wipe the surface with a rag to remove all dust and debris
  • If lumber is frozen, clean off any ice that is present on the surface
  • In low humidity, mist water into the void which is to be foamed.

PUR 1G Foam Application

  • The can should be between 60-80 degrees F.
  • Shake can well for 30 seconds; thread can to adaptor. Take care not to make it too tight.
  • Purge air and moisture from the gun by pulling the trigger for 5 seconds.
  • The can needs to be in a vertical postion above the gun when foaming.
  • Before foaming, start with a few practice beads. Adjust the set screw on the back of the gun for your needs.
  • Use a layering technique when foaming large cross sections
  • For hard to reach areas, attach a flexible tubing to the end of  the gun.
  • Foaming Around Windows
Retreatment As needed. Exposed to sunlight, this foam will gradually decompose. It is recommended to use a coat of paint to protect the foam.
Shipping Restrictions AK, HI

Can not be shipped by expedited choices, per air regulations.

More Instructions Always keep a can of foam on the gun. If not , this would allow the foam to cure and cause damage to the gun.

Frequently Asked Questions


Write Your Own Review
You're reviewing:Pur-Fill 1G Beige Foam - 750 ml can
Your Rating
What's this? Check "Remember Me" to access your shopping cart on this computer even if you are not signed in.