PUR Black- Black Gun Foam - (BF01)
PUR Black Foam will expand and bond on surfaces to seal voids, cracks and crevices where rodents or insects may enter structures. It wil also seal and stop the passage of air, gases, water, dust fibers, sound and odors.Pur-Black Foam by Todol for the Pageris foam gun is a closed cell, moisture curing, polyurethane foam. A carbon has been added to the formulation to blacken the polyurethane resin.
BUNDLE & SAVE 5%!
PUR Black Gun Foam by Todol
PUR Black Foam will expand and bond on surfaces to seal voids, cracks and crevices where rodents, bats, birds, squirrels or insects may enter structures. It wil also seal and stop the passage of air, gases, water, dust fibers, sound and odors. It is a polyurethane and moisture curing foam.
General Uses For PUR Black Gun Foam
Pur Black Foam is perfect for pest control operators, arborists, nuisance control experts, roofers, general contractors, Insulation contractors, and more.
Coverage and Application of PUR Black Foam
PUR Black Foam has a volume of 2,800 cu. in.of cured foam that can cover a 1/2" diameter bead of sealant over 1,200 linear feet.
PUR Black must be used with applicator gun such as the Pur Shooter, Pageris Eco or Pageris Gun. This would ensure control and accurate placement of foam. It is free of tack in 10 minutes and can be trimmed in 30 minutes.
PUR Black Foam Advantages
This cured foam in PUR Black resists age hardening, solvents and water, but will decompose under direct sunlight. It is recommended to use a coat of paint to protect PUR Black Foam.
- 12 Gal. Expanded Volume
- Ozone friendly
- Professional control
- No cleaning needed
- Black colored foam
- Use outdoors
- Seals out rodents,bats, squirrels, birds and insects
- Solves rot problems in trees
- Fills pitch pockets for roofers
|Seals out rodents,bats, squirrels, birds and insects.
|Active Ingredient (s)
|For Use :
|1/2" diameter bead of sealant over 1,200 linear feet
How to Use Pur Black Foam:
PUR Black Foam Application
|As needed. Exposed to sunlight, this foam will gradually decompose. It is recommended to use a coat of paint to protect the foam.
Can not be shipped by expedited choices, per air regulations.
|Always keep a can of foam on the gun. If not , this would allow the foam to cure and cause damage to the gun.